CAM2_RC_ parameters¶
6 parameters in the CAM2_RC_ family. ArduCopter 4.7 only — other vehicles share many of these names but not always the same ranges or meanings.
CAM2_RC_BTN_DELY¶
RunCam button delay before allowing further button presses
Time it takes for the a RunCam button press to be actived in ms. If this is too short then commands can get out of sync.
User level |
Advanced |
CAM2_RC_BT_DELAY¶
RunCam boot delay before allowing updates
Time it takes for the RunCam to become fully ready in ms. If this is too short then commands can get out of sync.
User level |
Advanced |
CAM2_RC_CONTROL¶
RunCam control option
Specifies the allowed actions required to enter the OSD menu and other option like autorecording
User level |
Advanced |
Bitmask¶
Value |
Meaning |
|---|---|
|
Stick yaw right |
|
Stick roll right |
|
3-position switch |
|
2-position switch |
|
Autorecording enabled |
CAM2_RC_FEATURES¶
RunCam features available
The available features of the attached RunCam device. If 0 then the RunCam device will be queried for the features it supports, otherwise this setting is used.
User level |
Advanced |
Bitmask¶
Value |
Meaning |
|---|---|
|
Power Button |
|
WiFi Button |
|
Change Mode |
|
5-Key OSD |
|
Settings Access |
|
DisplayPort |
|
Start Recording |
|
Stop Recording |
CAM2_RC_MDE_DELY¶
RunCam mode delay before allowing further button presses
Time it takes for the a RunCam mode button press to be actived in ms. If a mode change first requires a video recording change then double this value is used. If this is too short then commands can get out of sync.
User level |
Advanced |
CAM2_RC_TYPE¶
RunCam device type
RunCam device type used to determine OSD menu structure and shutter options.
Values¶
Value |
Meaning |
|---|---|
|
Disabled |
|
RunCam Split Micro/RunCam with UART |
|
RunCam Split |
|
RunCam Split4 4k |
|
RunCam Hybrid/RunCam Thumb Pro |
|
Runcam 2 4k |