SIM_VOLZ_ parameters¶
3 parameters in the SIM_VOLZ_ family. ArduCopter 4.7 only — other vehicles share many of these names but not always the same ranges or meanings.
SIM_VOLZ_ENA¶
Volz simulator enable/disable
Allows you to enable (1) or disable (0) the Volz simulator
User level |
Advanced |
Values¶
Value |
Meaning |
|---|---|
|
Disabled |
|
Enabled |
SIM_VOLZ_FMASK¶
Volz fail mask
fail servo at current position. Channel 1 is bit 0.
User level |
Advanced |
SIM_VOLZ_MASK¶
Volz override mask
mask of servo output channels to override with values from Volz protocol. Note these are indexed from 0 - so channel 3 (usually throttle) has value 4 in this bitmask (1<<2).
User level |
Advanced |